INTRODUCTION
Why Good Condition of Home Paint is Necessary?
- Better Air Quality
- Increased Property Value
- Enhanced Curb Appeal
- Inexpensive Remodel
- Reduce Dust and Dirt
- Protects User Home
- Personalization
Paint provides a protective barrier over areas easily affected by the weather on the outside and wear and tear on the inside. Uber For Handyman Services should be used to Hire Professional Painters to do the Required Job. It is the task of a Painter to first prepare the surface for painting by removing old paint, filling holes and washing walls. Painters apply Paint to Walls and other surfaces using brushes, rollers or spray equipment. Painters clean up painting tools and supplies, replace fixtures, and rearrange furniture after completing the project. There are other responsibilities of a Painter such as Being Good at Math and Aesthetics. Painters need to Calculate the amount of materials and Time required for the Project. And Collaborate with other construction professionals such as Carpenters, Electricians, and Plumbers.
What are the common Paint Problems?
The Contender at the Top Position is Blistering! But What is it? The bubbles that one may observe forming from the underlying surface of the wall paint are Blisters. They are caused by moisture being drawn out from the surface that the paint is applied to. It can be caused by applying paint to a damp surface or re-coating too quickly. There is another reason for the occurrence of Blisters – Insufficient Surface Preparation. So, What is the Solution? Just Log into Handy Clone App and Hire a Professional Painter to fix the issue. The Trained Expert will recommend avoiding Painting under extreme Humidity or if a high dew point is present. It is to be ensured that the Surface is Dry before the Paint Application. But assuming that the Blisters have gone down to the surface, What to do next? The Expert will suggest installing vents and exhaust fans in affected areas. Also, worth mentioning here is that the Painter needs to choose the Correct Primer Undercoat for the type of surface to be painted.
What is Chalking?
It is loosely-based powder forming in painted walls. Low quality paints with high levels of pigment extenders is the root cause of the problem. Other major factors for Chalking are the age, the colour or application of the paint. Sometimes, Chalking is bound to happen if the Color contains large amount of tint. Or when the Paint is thinned out too much, this problem occurs. Remove the loose paint by scraping. Prime bare spots and repaint affected areas. It is to be ensured that High-end Quality Paint is applied at recommended spreading rate and thinning rate. Then, the next problem is Cracking! It can be explained as splitting of dry paint film through at least one coat. It could also be that the first coat was not completely dry before application of the second coat. What is the solution then? Scrap and feather sand the affected area and apply correct primer coat before repainting with a high-quality paint at the recommended spreading rate.
What is Mildew?
Mould/Mildew is a fungus characterised by black, grey, brown, and green spots growing on the surface. It likes to grow in areas with high moisture, improper ventilation and lack of sunlight. Low-quality paint that contains no/inadequate bacteria shield (Inhibits mould and mildew), increases the chance of growth. How can Local Handyman App come to the rescue. The Experienced Professional will Scrub the affected area with household white vinegar to kill the mould spore. Apply a coat of stain blocking primer. Avoid using low-quality acrylic or oil-based alkyd paint and install exhaust fans in high moisture areas to ensure proper ventilation. Next common Paint problem is Yellowing! While yellowing occurs at places with low-sunlight, it is best to avoid using alkyd or oil-based paint in these areas. Acrylic paints are best in situations as mentioned above. The Most common problem of all is Peeling! It is characterised by peeling-off of an outer paint layer from an earlier paint layer. It can be caused by loss of adhesion between a coating and a substrate, high moisture, or applying paint directly to a dirty or dusty wall.
How to Fix Peeling?
Scrape away the peeling paint and smooth out the affected areas by sanding. Apply a good sealer/undercoat. Repaint with a Top-quality paint. What is Wrinkling or Shrivelling? A painted surface that forms a skin that appears wrinkled or shrivelled is caused by paint being applied to heavily on a surface. Or the application of the second coat is applied without letting the first coat dry properly. Uncured paint exposed to rain, dew, and high humidity is also a possible factor for wrinkling or shrivelling. What is the solution? It requires patience to let the base coat of a paint job dry completely prior to the final coat application. Allow extra time to dry if painting under hot, cool or damp weather. Paint should also be distributed evenly. Follow manufacturer’s recommendations for spreading rate and environmental conditions.
CONCLUSION
The occurrence of these common paint problems is due lack of diligence of the person who did the work. Or it could be lack of knowledge with the paint products. Maintenance for repainting is often expected after a period of time. Prevention is better than a cure – That is the Mantra of On Demand Handyman App.
