Bristol housing is older compared to the other cities of its scale. Stroll through Clifton or Redland or Southville and you are virtually still examining Victorian and Georgian terraces, most of which have suspended timber floors, subfloors which are not straight, and a dampness which is the result of keeping half way down to the Avon. And it is that history that determines what kind of wood flooring bristol actually works on this ground, more than any fash.
The lesser of the evils is engineered wood.
Engineered wood makes sense as the starting point of most Bristol properties. It has an actual wood veneer over a plywood or MDF core, therefore is much more resistant to events that occur when humidity varies, like what happens most in houses which were built before central heating became a common practice. It also fits very well over underfloor heating, which is increasingly being installed by Bristol homeowners during their renovations. Engineered wood will stand up much better than solid boards under these conditions: if your back door is on a damp wall or it is an old cellar.
Solid wood has not disappeared yet.
The oak or walnut floors that are solid are different compared to engineered, and are deeper in their grain and can be sanded and refinished over a hundred times over a hundred years. They are better fitted on the upper levels, in drier rooms. What they do not accommodate is a ground-floor flat in a Victorian terrace having a suspended timber floor that was not last noticed to have been ventilated thirty years prior. It is a good idea to have someone inspect the subfloor of an old Bristol house before the solid wood is fitted in any of the rooms. The most frequent cause of solid floors cupping or dropping out within one or two years is neglecting that step.
Species worth considering
Oak is the most prevalent and rightly so. It is durable, and it accepts a stain should you wish to go darker and it fits both a stripped-out Georgian hallway and a more modern extension as well. Walnut feels richer and darker which can be carried in period homes where high ceilings and large windows may otherwise overpower the room. Ash is lighter and rare, and some like that there is no oak in it.
Parquet and herringbone
When you are renovating an old house in Clifton or Redland, herringbone, and parquet motifs crop up frequently and there is a rationale beyond style. These designs were typical of Georgian and Victorian houses in their early days, and therefore are best suited to cornicing, sash windows and the dimensions of those rooms. An engineered herringbone is now popular since it provides the appearance of the pattern without the carpet-like motion that solid parquet has when suspended on a floating floor.
A class of subfloors in Bristol.
The city of Bristol was built on clay, and the subfloors of older houses are not exactly horizontal after a hundred years of settling. Whatever flooring bristol you use must first be well prepared: new timber floors must be checked to see that any dampness is eliminated, a levelled surface provided where necessary, and that there is adequate ventilation beneath a suspended timber floor. This is more important than the choice of flooring. Any well-designed floor painted over a prepared, un-dry subfloor will collapse. Properly fitted modest floor will survive.
Oiled or lacquered
Finishes that sink into the wood tend to appear more natural, and more matte, and it is simpler to spot-repair, which can simply be re-oiled, in which case it appears as if the spot has never been damaged. Finishes are scarred with a harder protective coating on top, that are more resistant to heavy foot traffic and can be cleaned more readily in normal daily use, though scratches are more evident and the damage easily patched up would involve refinishing the entire board and not merely a small section. Lacquer is favored in busy family homes. Oil is suitable in studies, bedrooms and low traffic rooms.
To the majority of Bristol houses, that would imply engineered oak as safe, versatile, solid wood where the room, the subfloor will sustain it and herringbone where the house has the period mindset to suit.
Get the Best Flooring Specialist in Bristol.
Selection of a good flooring company is a significant aspect of the process. Find an expert who can demonstrate the materials available, talk more about the preparations required and explain installation.
Floor Everest provides a variety of wooden flooring products such as engineered oak, solid wood, parquet and herringbone flooring.
No matter whether you are updating an old house or redecorating a modern interior, researching to diversify your possibilities can make you locate a floor that can fit your space.
Final Thoughts
Selection of wood flooring is a matter of compromising between appearance, functionality and future worth. Which of these is the best? This will be determined by the style of your property, the condition under which its subfloor lies, the cost and daily needs.
Natural oak boards up to ornamental herringbone designs are but a few of the options available to you in enhancing your Bristol home with quality wooden flooring.





